During the calcination process, the new dry process cement clinker has a firing temperature of about 1450. The temperature of the rotary kiln firing zone is as high as 1 700 or ...

The blast furnace ironmaking hot blast stove is an important core kiln in the iron making process. The high alumina brick is widely used as a refractory material in hot blast st...

Because of good high temperature performance than low price ratio, fused zirconia corundum brick products was widely used.

High purity, high density, high performan...

Prepared batchwas putinto glass pool kiln(it was built withfused zirconia corundum brick) for melting and clarifying. Kiln pool was built on H-shape steel beam supported by stan...

1 Scope

This standard specifies the terms and definitions, grades, shape and size, technical requirements, test methods, quality assessment procedures, packaging, marki...

The molten iron swinging trough is used for collecting the molten iron of the blast furnace tapping field, and the molten iron flowing out from the fixed trench of the tapping f...

In the calcination process, the sintering temperature of the new dry cement clinker reaches about 1450, and the gas temperature of the sintering belt of the rotary kiln reaches ...

Refractory bricks are classified into acid refractory bricks, neutral refractory bricks and alkaline refractory bricks according to their chemical properties. Among them, the ac...