The three major thermal equipments produced by glass use float glass as an example, including float glass furnaces, float glass tin baths and glass annealing kiln.
In t...
The kiln is the core equipment of the glass factory. It is usually repaired once in a few years. The reasons for cold repair under normal conditions are as follows.
A. ...
In the circulating fluidized bed boiler, the concentration of solid materials in the circulating fluidized bed boiler is several tens to hundreds times higher than that of the p...
The Inner Side of the Hot Blast Furnace
1 Overview
According to the textbook, the blast furnace column is divided into a block zone, a soft melt zone, a dr...
The ladle is a container of molten steel. The commonly used refractory materials are aluminum-magnesium spinel ladle castable, magnesia-alumina spinel brick, ladle lining brick...
A typical Slide Gate System consists of
Refractory castables and refractory cement are common refractory materials, they are widely used, high refractoriness, then what is the difference between the two We can refer t...
Construction structure diagram of inner lining of furnace cover for mining hot furnace. The inner lining of furnace cover adopts precast block hoisting masonry mode, the working...